|
|
| |
RCM
Compressed Gas Flow Meter |
 The RCM Industries compressed
air meters are well suited to monitoring compressed air flow
rates. These meters plumb directly into the pipelines and
require no external power connections. Use these meters to
determine the air consumption of tools for improved accounting
and increased efficiency.
Available with:
The Flo-Gage flowmeter has been developed for industrical
applications where durability and reliability are important
considerations in the monitoring of flow. The Flo-Gage has
accuracy for most industrial processes and is particularly
suited for applications where compactness, low cost, minimal
maintenance and resistance to accidental damage are important
factors.
Other
compressed gases can be monitored as well. Common gases monitored
include nitrogen, oxygen, argon, carbon dioxide, natural
and LP gases.
All meters are available in either threaded
or flanged connections and in Bronze,
Monel or 316SS.
|
| |
| All Meters Feature: |
- Sturdy in-line metal construction to withstand piping stresses
without breaking.
- Black on white dial won't crack, glaze or become hard to
read with age.
- Expanded 3.5" (90mm) 270° analog dial for reading
at a glance.
- Suitable for use with both opaque and clear fluids.
- Measures 6:1 range with 3% F.S. Accuracy.
- Dial and case factory configured for quick installation
- but easily field re-configured if needed.
- Liquid flow ranges from 4 GPH (15 l/h) in 1/2" meter
to 3000 GPM (1200 l/m) in 8" meter.
- Gas flow ranges from 40 SCFH (1 Nm3/h) in 1/2" meter
to 20,000 SCFM (600 Nm3/m) in 8" meter.
|
| |
| RCM Flowmeter
available Construction |
| Specifications |
Standard |
Optional |
| Housing |
Polycarbonate-UV Stabilized |
None |
| Body |
Bronze |
Monel - 316SS |
| Bellows |
Bronze |
Monel - 316SS - Inconel |
| Seals |
Buna-N |
Viton - EPR - Teflon |
| Crystal |
Polycarbonate |
None |
| Gear Movement |
Bronze |
316SS |
| Accuracy |
± 3% F.S. |
± 3% F.S. |
| Repeatability |
± 1% F.S. |
± 1% F.S. |
| Pressure - Maximum |
180psig |
400psig |
| Pressure - Minimum |
10psig |
10psig |
| Temperature - Maximum |
212° F |
350° F |
| Temperature - Minimum |
-30° F |
-80° F |
|
|
|
| |
| Application:
Mount a Flo-Gage downstream of a pressure regulator to monitor
compressor operation and air utilization. Flo-Gages
can be used at the compressor as well as at key distribution
points. Reduction in wasted air can pay back installation
cost in as little as a few weeks !
Option
I is for Compressed Gas Service. This
option sizes the meter orifices to suit the desired flow rate,
gas composition, line pressure and temperature. Dials
are marked with type of gas, specific gravity, line pressure
and temperature. |
| |
| Related Files
/ Links: |
|
| |
| Previous
Page |
| |
|
|
