| |
Saturated
Steam Flow Meters |
|
 Steam
flow meters measure saturated steam in an inexpensive, easy
to apply flow meter. The
steam service option inlcudes EPR seals, SS bellows and an
inverted housing.
Steam pressures are limited
to 120# saturated unless remote mounted (Option
R2).
All meters are available in either
threaded (Series 7000) or flanged (Series 8000) connections
and in Bronze, Monel or 316SS. |
| Click
Here For Large Image Of Series 7000 (threaded style) |
| Click
Here For Large Image Of Series 8000 (wafer style) |
| |
| Features: |
- Sturdy in-line metal construction to withstand piping stresses
without breaking.
- Black on white dial won't crack, glaze or become hard to
read with age.
- Expanded 3.5" (90mm) 270° analog dial for reading
at a glance.
- Suitable for use with both opaque and clear fluids.
- Measures 6:1 range with 3% F.S. Accuracy.
- Dial and case factory configured for quick installation -
but easily field re-configured if needed.
- Liquid flow ranges from 4 GPH (15 l/h) in 1/2" meter
to 3000 GPM (1200 l/m) in 8" meter.
- Gas flow ranges from 40 SCFH (1 Nm3/h) in 1/2" meter
to 20,000 SCFM (600 Nm3/m) in 8" meter.
|
| |
| Construction: |
| Specifications |
Standard for Steam |
Optional |
| Housing |
Polycarbonate-UV Stabilized |
None |
| Body |
Bronze |
Monel - 316SS |
| Bellows |
316SS |
Monel - Inconel |
| Seals |
EPR |
Viton - Teflon |
| Crystal |
Polycarbonate |
None |
| Gear Movement |
Bronze |
316SS |
| Accuracy |
± 3% F.S. |
± 3% F.S. |
| Repeatability |
± 1% F.S. |
± 1% F.S. |
| Pressure - Maximum |
120psig |
400psig |
| Pressure - Minimum |
10psig |
10psig |
| Temperature - Maximum |
212° F |
350° F |
| Temperature - Minimum |
-30° F |
-80° F |
|
|
|
| |
| REMOTE
READOUT ! |
|
Adapters and 3-way equalizing valve provide extended temperature
ranges or remote mount for more convenient viewing. Ask
for Option R2
Option
W3: Current Output. Uses
a solid state strain gauge to sense the differential pressure
directly. Conditions which could cause the mechanical movement
zero to shift will not affect the output from this transmitter. This
transmitter provides improved rangeability at low flow
rate and accordingly, does not include a low flow cutoff. Output
is proportional to flow rate squared rē. Square root
extraction is required in the receiving device. See
Picture of Remote Reading Flowmeter |
| |
| Related Files / Links |
|
|
| |
| Previous Page |
| |
